Introduction; Unpacking Instructions; Hardware Preparation - Motorola MVME162LX 300 Series Installation And Use Manual

2Hardware Preparation and

Introduction

This chapter provides unpacking instructions, hardware preparation
guidelines, and installation instructions for the MVME162LX Embedded
Controller.

Unpacking Instructions

If the shipping carton is damaged upon receipt, insist that
!
the carrier's agent be present during the unpacking and
inspection of the equipment.
Caution
Avoid touching areas of integrated circuitry; static
discharge can damage circuits.
Unpack the equipment from the shipping carton. Place the equipment on a
clean and adequately protected working surface. Refer to the packing list
and verify that all items are present. Save the packing material for storing
and reshipping of equipment.

Hardware Preparation

To select the desired configuration and ensure proper operation of the
controller, certain option modifications may be necessary before
installation. The controller provides software control for many of these
options. Some options cannot be modified in software, and consequently
are set by installing or removing jumpers on PCB headers. Most other
modifications are performed by setting bits in control registers after the
controller has been installed in a system.
The controller's registers are described in the MVME162LX Embedded
Controller Programmer's Reference Guide.
Installation
2
2-1