Table of Contents
Advertisement
All Motorola printed wiring boards (PWBs) are manufactured by UL-recognized
manufacturers, with a flammability rating of 94V-0.
This equipment generates, uses, and can radiate electro-
!
magnetic energy. It may cause or be susceptible to electro-
magnetic interference (EMI) if not installed and used in a
WARNING
cabinet with adequate EMI protection.
European Notice: Board products with the CE marking comply with the EMC
Directive (89/336/EEC). Marking a system with the CE symbol indicates
compliance of that Motorola system to the applicable directives of the European
Community. A system with the CE marking meets or exceeds the following
technical standards:
EN55022 (CISPR 22): Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment. Tested to
Equipment Class B.
EN50082-1, 1992: Electromagnetic Compatibility -- Generic Immunity
Standard, Part 1: Residential, Commercial and Light Industry.
IEC801-2: Electromagnetic Compatibility for Industrial Process
Measurement and Control Equipment, Part 2: Electrostatic Discharge
Requirements.
IEC801-3: Electromagnetic Compatibility for Industrial Process
Measurement and Control Equipment, Part 3: Radiated Electromagnetic Field
Requirements.
IEC801-4: Electromagnetic Compatibility for Industrial Process
Measurement and Control Equipment, Part 4: Electrical Fast Transient/Burst
Requirements.
The product also fulfills EN60950 (product safety) which is essentially the
requirement for the Low Voltage Directive (73/23/EEC).
In accordance with European Community directives, a "Declaration of
Conformity" has been made and is on file at Motorola, Inc. - Computer Group,
27 Market Street, Maidenhead, United Kingdom, SL6 8AE.
This board product was tested in a representative system to show compliance with
the above mentioned requirements. A proper installation in a CE-marked system
will maintain the required EMC/safety performance.
Advertisement
Table of Contents
