Disk/Tape Controller Modules Supported - Motorola MVME162LX 300 Series Installation And Use Manual

Disk/Tape Controller Modules Supported

Note
The following VMEbus disk/tape controller modules are supported by the
162Bug. The default address for each controller type is First Address and
the controller can be addressed by First CLUN during commands
or
IOP
another controller of the same type is used, the second one must have its
address changed by its onboard jumpers and/or switches, so that it matches
Second Address and can be called up by Second CLUN.
Controller Type
CISC Embedded Controller
MVME320 - Winchester/Floppy Controller $11 (NOTE 2) $FFFFB000
MVME323 - ESDI Winchester Controller
MVME327A - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME328 - SCSI Controller
MVME350 - Streaming Tape Controller
Notes
BDisk/Tape Controller Data
The controllers listed below have been discontinued as of the
publication date of this manual. The information contained in
this appendix is provided for customers that may have
ordered these controllers prior to the discontinuance date.
, or during TRAP #15 calls .DSKRD or .DSKWR. Note that if
$00 (NOTE 1) --
If an MVME162LX Embedded Controller with a SCSI port
:
is used, then the controller has CLUN 0.
For MVME162LX Embedded Controllers, the first
MVME320 has CLUN $11, and the second MVME320 has
CLUN $12.
First First
CLUN Address
$08 $FFFFA000
$02 $FFFFA600
$06 $FFFF9000
$16 $FFFF4800
$18 $FFFF7000
$04 $FFFF5000
B
BH
Second Second
CLUN Address
-- --
$12 (NOTE 2) $FFFFAC00
$09 $FFFFA200
$03 $FFFFA700
$07 $FFFF9800
$17 $FFFF5800
$19 $FFFF7800
$05 $FFFF5100
, ,
BO
B-1