Table of Contents
Advertisement
Set Environment to Bug/Operating System
A
ENV Parameter and Options
Master Control #1
Master Enable #2 [Y/N]
Master Starting Address #2
Master Ending Address #2
Master Control #2
Master Enable #3 [Y/N]
Master Starting Address #3
A-12
Table A-1. ENV Command Parameters (Continued)
Default
00000000
00000000
00000000
Meaning of Default
0D
Defines the access characteristics for the
address space defined with this master address
decoder. Default is $0D.
N
Do not setup and enable the Master Address
Decoder #2.
Base address of the VMEbus resource that is
accessible from the local bus. Default is
$00000000.
Ending address of the VMEbus resource that is
accessible from the local bus. Default is
$00000000.
00
Defines the access characteristics for the
address space defined with this master address
decoder. Default is $00.
N
Yes, setup and enable the Master Address
Decoder #3. This is the default if the board
contains less than 16MB of calculated RAM.
Do not setup and enable the Master Address
Decoder #3. This is the default for boards
containing at least 16MB of calculated RAM.
Base address of the VMEbus resource that is
accessible from the local bus. If enabled, the
value is calculated as one more than the
calculated size of memory. If not enabled, the
default is $00000000.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
