Table of Contents
Advertisement
Set Environment to Bug/Operating System
A
ENV Parameter and Options
ROM Boot Abort Delay
ROM Boot Direct Starting
Address
ROM Boot Direct Ending
Address
Network Auto Boot Enable [Y/N]
Network Auto Boot at power-up
only [Y/N]
Network Auto Boot Controller
LUN
Network Auto Boot Device LUN
Network Auto Boot Abort Delay
A-6
Table A-1. ENV Command Parameters (Continued)
Default
FF800000
FFDFFFFC Last location tested when the Bug searches for
Meaning of Default
00
This is the time in seconds that the ROMboot
sequence will delay before starting the boot.
The purpose for the delay is to allow you the
option of stopping the boot by use of the Break
key. The time value is from 0 through 255
seconds.
First location tested when the Bug searches for
a ROMboot module.
a ROMboot module.
N
Network Auto Boot function is disabled.
Y
Network Auto Boot is attempted at power up
reset only.
00
LUN of a disk/tape controller module currently
supported by the Bug. Default is $0.
00
LUN of a disk/tape device currently supported
by the Bug. Default is $0.
5
This is the time in seconds that the Network
Boot sequence will delay before starting the
boot. The purpose for the delay is to allow you
the option of stopping the boot by use of the
Break key. The time value is from 0 through
255 seconds.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
