Motorola MVME162LX 300 Series Installation And Use Manual page 137

Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Auto Boot at power-up only
[Y/N]
Auto Boot Controller LUN
Auto Boot Device LUN
Auto Boot Abort Delay
Auto Boot Default String
[Y(NULL String)/(String)]
ROM Boot Enable [Y/N]
ROM Boot at power-up only
[Y/N]
ROM Boot Enable search of
VMEbus [Y/N]
http://www.mcg.mot.com/literature
Configure and Environment Commands
Default
Y Auto Boot is attempted at power up reset only.
00 LUN of a disk/tape controller module currently
supported by the Bug. Default is $0.
00 LUN of a disk/tape device currently supported
by the Bug. Default is $0.
15 This is the time in seconds that the Auto Boot
sequence will delay before starting the boot.
The purpose for the delay is to allow you the
option of stopping the boot by use of the Break
key. The time value is from 0 through 255
seconds.
You may specify a string (filename) which is
passed on to the code being booted. Maximum
length is 16 characters. Default is the null
string.
N ROMboot function is disabled.
Y ROMboot is attempted at power up only.
N VMEbus address space will not be accessed by
ROMboot.
Meaning of Default
A
A-5