Labels - GE AKTAprime plus Operating Instructions Manual

2 Safety instructions
2.1 Safety precautions
2.2

Labels

In this section
This section describes the instrument labels and labels concerning hazardous substances
that are attached to the ÄKTAprime plus instrument. For information about marking of
the computer equipment, refer to the manufacturer's instructions.
Labels on the instrument
The illustration below shows an example of the identification label that is attached to
the ÄKTAprime plus instrument.
24
CAUTION
The system uses high intensity ultra-violet light. Do not remove the
UV lamp while the system is running. Before replacing a UV lamp,
ensure that the lamp is disconnected to prevent injury to eyes.
If the mercury lamp is broken, make sure that all mercury is re-
moved and disposed according to national and local environmental
regulations.
NOTICE
Cleaning. Keep the instrument dry and clean. Wipe regularly with
a soft damp tissue and, if necessary, a mild cleaning agent. Let the
instrument dry completely before use.
ÄKTAprime plus Operating Instructions 28-9597-89 AB