GE AKTAprime plus Operating Instructions Manual page 40

4 Operation
4.4 Performing a run
Viewing the run
When the pump starts running, the progress of the run can be viewed in the two panes
in PrimeView.
•
•
Selecting curves to be displayed
1 In PrimeView module, select View:Properties.
2 In the Properties dialog, click the Curves tab.
3 In the Display curves list, select the curves you want to display.
4 Click OK.
For more information on customizing the view panes, see PrimeView User Manual.
40
The Curves pane displays monitor signal values graphically.
The Logbook pane displays all actions (e.g. method start and end, base instructions
and method instructions) and unexpected conditions (e.g. warnings and alarms). The
log is saved in the result file.
ÄKTAprime plus Operating Instructions 28-9597-89 AB