Labels - GE Amersham Imager 600 Operating Instructions Manual

2 Safety instructions

2.2 Labels

2.2

Labels

Introduction
A label on the exterior of the Amersham Imager 600 instrument describes the specifica-
tions and precautions necessary to safely use the instrument. This section lists and ex-
plains the symbols on the label and the additional symbols used on the instrument.
Amersham Imager 600 system
label
The Amersham Imager 600 instrument serial number is found on the label located on
the back of the instrument.
Symbols used on the labels
The following symbols are found on the label on the instrument:
Label
22
Meaning
Warning! Read the Operating Instruction before using the system.
Do not open any covers or replace parts unless specifically stated
in the Operating Instruction.
Amersham Imager 600 Operating Instructions 29-0645-17 AD