GE AKTAprime plus Operating Instructions Manual page 23

2 Safety instructions
2.1 Safety precautions
WARNING
NaOH is corrosive and therefore dangerous to health. When using
hazardous chemicals, avoid spillage and wear protective glasses
and other suitable Personal Protective Equipment (PPE).
WARNING
After assembly, the piping system must be tested for leakage at
maximum pressure for continued protection against injury risks
due to fluid jets, burst pipes or explosive atmosphere.
WARNING
Before disassembly, check that there is no pressure in the piping
system.
WARNING
Disconnect power. Always disconnect power from the instrument
before replacing fuses.
WARNING
Decontaminate the equipment before decommissioning to ensure
that hazardous residues are removed.
CAUTION
Fire hazard. Follow instructions in ÄKTAprime plus Operating
Instructions for correct installation of a new UV-lamp. If the lamp
is not installed properly it may be overheated and cause a fire
hazard.
ÄKTAprime plus Operating Instructions 28-9597-89 AB 23