GE AKTAprime plus Operating Instructions Manual page 9

International standards
This product fulfills the requirements of the following standards:
Standard
EN/IEC 61010-1,
UL 61010-1,
CAN/CSA-C22.2
No. 61010-1
EN 61326-1
EN ISO 12100
Regulatory compliance of
connected equipment
Any equipment connected to ÄKTAprime plus should meet the safety requirements of
EN 61010-1/IEC 61010-1, or relevant harmonized standards. Within the EU, connected
equipment must be CE marked.
Environmental conformity
Requirement
2011/65/EU
2012/19/EU
Regulation (EC) No
1907/2006
ACPEIP
ÄKTAprime plus Operating Instructions 28-9597-89 AB
Description
Safety requirements for electrical
equipment for measurement,
control, and laboratory use
Electrical equipment for measure-
ment, control and laboratory use
- EMC requirements
Safety of machinery. General
principles for design. Risk assess-
ment and risk reduction.
Title
Restriction of Hazardous Substances (RoHS) Directive
Waste Electrical and Electronic Equipment (WEEE) Direc-
tive
Registration, Evaluation, Authorization and restriction
of CHemicals (REACH)
Administration on the Control of Pollution Caused by
Electronic Information Products, China Restriction of
Hazardous Substances (RoHS)
1 Introduction
1.2 Regulatory information
Notes
EN standard is harmonized
with EU directive
2006/95/EC
EN standard is harmonized
with EU directive
2004/108/EC
EN ISO standard is harmo-
nized with EU directive
2006/42/EC
9