Labels - GE SE 250 Mighty Small II Operating Instructions Manual

2 Safety information

2.2 Labels

2.2

Labels

Introduction
This section describes the system label and other safety or regulatory labels that are
attached to the product.
Description of symbols on the
system label
The table below describes the various symbols that may be found on the system label.
Label
20
Meaning
Warning! Read the user documentation before using the system.
Do not open any covers or replace parts unless specifically stated
in the user documentation.
This symbol indicates that the waste of electrical and electronic
equipment must not be disposed as unsorted municipal waste and
must be collected separately. Please contact an authorized repre-
sentative of the manufacturer for information concerning the de-
commissioning of equipment.
This symbol indicates that the product does not contain toxic or
hazardous materials in excess of the limits established by the Chi-
nese standard GB/T 26572 Requirements of concentration limits for
certain hazardous substances in electrical and electronic products,
and can be recycled after being discarded, and should not be casu-
ally discarded.
The system complies with applicable European directives.
Eurasian Conformity mark: the single conformity mark indicates
that the product is approved for circulation on the markets of the
member states of the Eurasian Customs Union.
SE 250/260 Mighty Small II Operating Instructions 29281629 AA