Installing And Connecting; Safety Information; Direct Sunlight - Siemens FIDAMAT 6 Operating Instructions Manual

Installing and connecting

3.1

Safety information

Danger of explosion
The FIDAMAT 6 gas analyzer must not be used to measure mixtures that are ignitable in
normal operation. If the device is to be used to measure flammable gases that can combine
with air or oxygen to form an ignitable mixture, special measures must be taken to provide
protection against explosion!
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are
• Mount the device using suitable tools. Refer to the information in Installation
3.1.1

Direct sunlight

Direct sunlight
Device damage.
The device can overheat or materials become brittle due to UV exposure.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer
FIDAMAT 6
Operating Instructions, 03/2018, A5E00222135-03
DANGER
used.
requirements (Page 30).
CAUTION
to the information in Technical specifications (Page 149).
3
29