Installing And Connecting The Irda Interface Adapter - Siemens SITRANS FUS080 Operating Instructions Manual

The commissioning is divided into the following steps:
1. Installing and connecting in the IrdA interface adapter
2. Installing the device driver (Page 34)
3. Adding the device to the network (Page 34)
4. Configuring the device (Page 34)
5. Optimizing the system (Page 40)
6. Checking the operation readiness (Page 41)
6.4.1

Installing and connecting the IrDA interface adapter

Note
IrDA driver installation
For installation of the IrDA driver, refer to the instructions delivered with the adapter.
1. Connect IrDA adapter to PC
2. Mount adapter on FUS080
When the IrDA adapter is connected correctly, a small icon appears on the taskbar of your
PC. When the mouse is placed on this icon, the device information will be shown (e.g.
"FUS080 SN1033 is in range").
SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
Commissioning
6.4 Commissioning via PDM
33