Functions
6.5 Parameters
6.5.4
On/off functions (function 52)
Figure 6-27
Note
Device-specific on/off functions can only be called using the first component ("THC").
With this function, you can easily switch other functions on and off, such as the ones listed in
the above function screen.
Thanks to this simplified operation, these functions do not have the longer paths through
various menus. For better orientation, the function numbers have also been specified.
Activated functions are marked by "■", deactivated ones by "□". Using the fifth softkey
("...continue"), jump to the next function screen with further functions.
84
On/off configuration
Operating Instructions, 03/2018, A5E00222135-03
FIDAMAT 6