Siemens FIDAMAT 6 Operating Instructions Manual page 20

Description
2.3 Control panel and communication
Inputs and outputs
● Two analog inputs can be configured
● One analog output 0/2/4 – 20 mA
● Six user-configurable binary inputs, for example, for:
– Autorange
– Processing external signals from the sample preparation
● Six user-configurable relay outputs, for example, for:
– Fault
– Maintenance request
– Limit alarm
– External solenoid valves
● Can be extended by eight binary inputs and eight relay outputs for automatic calibration
with a maximum of four calibration gases
Communication
● ELAN (RS 485) included in the standard configuration (connection at rear and behind the
fold-down front panel)
Options:
● Converter to RS 232 (for ELAN)
● Converter to TCP/IP Ethernet (for ELAN)
● Integration into networks via PROFIBUS DP/PA interface
● SIPROM GA software as service and maintenance tool (for ELAN)
18
Operating Instructions, 03/2018, A5E00222135-03
FIDAMAT 6