Siemens FIDAMAT 6 Operating Instructions Manual page 110

Functions
6.6 Configuration
A confirmation query is set up in this function. In order to actually load the respective data in
the memory, you must confirm with "yes". If you select "no", this is cancelled.
Note
Make sure you save every change in the configuration of the relay outputs in the user data
memory using function 75!
If you neglect to do this, there is a danger that a previous (unwanted) configuration will be
loaded by "Load user data" (function 75).
The following figure contains an overview of the interaction between the various memory
modules.
Figure 6-49
108
Memory modules
Operating Instructions, 03/2018, A5E00222135-03
FIDAMAT 6