Siemens FIDAMAT 6 Operating Instructions Manual page 14

Description
2.1 Field of application and features
Fields of application
Application areas
● Environmental protection
● Wastewater (in combination with a stripping device, detection of hydrocarbon content of
liquids)
● Occupational exposure limit monitoring in workplace air
● Quality monitoring
● Process exhaust monitoring
● Ultra-pure gas measurement in media such as O
gases
● Measurement of corrosive and condensing gases
● Process optimization
Further applications
● Chemical plants
● Gas manufacturers (ultra-pure gas monitoring)
● Research and development
● Cement industry (measurement of emissions)
● Paint shops and dry cleaners
● Refineries (tank farms, wastewater)
● Drying systems
● Solvent recovery systems
● Pharmaceutical industry
● Automotive industry (engine development, vehicle powertrain development and
certification)
Special applications
● Special-purpose applications
Besides the standard combinations, special-purpose applications are available on
request, e.g. measuring range 0 to 100%.
● TÜV version
Measurement in flue gases according to 13th/17th BlmSchV and TA Luft for fuel types oil,
coal, gas and waste.
Furthermore, the TÜV-approved versions of the FIDAMAT 6 comply with the
requirements of EN 14956 and QAL 1 according to EN 14181. Conformity of the devices
with both standards is TÜV-certified.
Determination of the device drift according to EN 14181 (QAL 3) can be done manually or
with a PC using the SIPROM GA maintenance and service software. In addition, selected
manufacturers of emission evaluation computers offer the possibility for downloading the
drift data via the analyzer's serial interface and to automatically record and process it in
an evaluation computer.
12
, CO , inert gases and cold sample
2 2
Operating Instructions, 03/2018, A5E00222135-03
FIDAMAT 6