Ricoh Da-P1 Field Service Manual page 446

3. Appendices: SP Mode Tables
011 Bit Switch B Settings
bit 0
bit 1
bit 2
bit 3
146
DFU
Print job interruption
0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print
queue, it will wait for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the currently printing
job and start printing immediately.
Switch for enabling or disabling Limitless Paper
Feeding for the Bypass Tray
When the Bypass Tray is the target of the Auto Tray Select and Any Size/Type is
configured for the Tray Setting Priority setting of the Bypass Tray, this BitSwitch can
switch the behavior whether or not Limitless Paper Feeding is applied to the Bypass
Tray.
*Limitless Paper Feeding will try a matching tray of the next highest priority if a job
specified to Auto Tray Select as the tray setting is submitted and the tray runs out of
paper.
Limitations when this BitSwitch is set to "1":
- The "Paper Tray Priority: Printer" setting must be configured to a tray other than the
Bypass Tray.
- Jobs that contain more than one paper size cannot be printed.
DFU
0 1
- -
Does not
Allow
allow
interruption
interruption
Enabled Disabled
- -