Updating Firmware; Before You Begin - Ricoh Da-P1 Field Service Manual

5. System Maintenance
Type of
firmware
Summary Font
PCL Font
PS Font
Netfile
Application
Printer
Application
WebSys
WebDocBox
Java VM

Updating Firmware

Before You Begin

An SD card is a precision device. Always observe the following precautions when you handle SD cards:
• Always switch the machine off before you insert an SD card. Never insert the SD card into the slot
with the power on.
• Do not remove the SD card from the service slot after the power has been switched on.
• Never switch the machine off while the firmware is downloading from the SD card.
• Keep SD cards in a safe location where they are not exposed to high temperature, high humidity,
or exposure to direct sunlight.
• Always handle SD cards with care. Do not bend or scratch them. Do not let the SD card get
exposed to shock or vibration.
• Make sure that the write protection of an SD card is unlocked when you download an application
to it. If not, downloading fails and a download error (e.g. Error Code 44) occurs during a firmware
upgrade.
152
Function
Summary fonts
PCL fonts
PostScript3 fonts
Feature application
Feature application
Web Service application
Document server
application
Java VM platform
Location of firmware
Flash ROM on the controller
board
Flash ROM on the controller
board
Flash ROM on the controller
board
Flash ROM on the controller
board
Flash ROM on the controller
board
Flash ROM on the controller
board
Flash ROM on the controller
board
Java VM card Option
Message shown
Font
FONT1
FONT2
NetworkDocBox
Printer
Web Support
Web Uapl
SDK1