Ricoh Da-P1 Field Service Manual page 367

Cer Updt Cond
0 The certification used by Embedded RC Gate is set correctly.
The certification request (setAuthKey) for update has been received from the
1
GW URL and certification is presently being updated.
The certification update is completed and the GW URL is being notified of
2
the successful update.
The certification update failed, and the GW URL is being notified of the
3
failed update.
The period of the certification has expired and new request for an update is
4
being sent to the GW URL.
A rescue update for certification has been issued and a rescue certification
11
setting is in progress for the rescue GW connection.
The rescue certification setting is completed and the GW URL is being
5-816-067 12
notified of the certification update request.
The notification of the request for certification update has completed
13 successfully, and the system is waiting for the certification update request
from the rescue GW URL.
The notification of the certification request has been received from the
14
rescue GW controller, and the certification is being stored.
The certification has been stored, and the GW URL is being notified of the
15
successful completion of this event.
The storing of the certification has failed, and the GW URL is being notified
16
of the failure of this event.
The certification update request has been received from the GW URL, the
GW URL was notified of the results of the update after it was completed, but
17
a certification error has been received, and the rescue certification is being
recorded.
The rescue certification of No. 17 has been recorded, and the GW URL is
18
being notified of the failure of the certification update.
[ - / - / - ]
CTL*
Displays the status of the certification
update.
Main SP Tables-5
67