Ricoh Da-P1 Field Service Manual page 381

5-844-007 PnP Serial Number
5-844-008 Mac Supply Level
5-844-100 Notify Unsupported
[Delivery Srv]
5845
These are delivery server settings.
5-845-003 Retry Interval
5-845-004 No. of Retries
5-845-022 InstantTrans Off
[ - / - / - ]
Sets the serial number to be used by the
USB PnP when "Function Enable (Level 2)
set so the USB Serial No. can have a
common name (SP5-844-005).
• Make sure that this entry is the same as
CTL*
the serial number in use.
• At initialization the serial number
generated from the model name is
used, not the setting of this SP code.
• At times other than initialization, the
value set for this SP code is used.
[0 or 1 / 1 / 1/step]
CTL* 0: OFF
1: ON
CTL* [0 or 1 / 1 / 1/step]
[0 to 900 / 300 / 1/step]
You can configure the interval before the
CTL*
sending of e-mail notification is retried when
it fails.
[0 to 99 / 3 / 1/step]
You can configure the number of times the
CTL*
sending of e-mail notification is retried when
it fails. If this is set to 3, the machine tries to
send e-mail notification up to four times.
[0 or 1 / 1 / -/step]
0: Control disabled
CTL*
1: Control enabled
Enables or disables the prevention function
for the continuous data sending error.
Main SP Tables-5
81