Ricoh Da-P1 Field Service Manual page 375

1284 Compatiblity
5-828-050
(Centro)
5-828-052 ECP (Centro)
5-828-065 Job Spooling
Job Spooling Clear: Start
5-828-066
Time
Job Spooling (Protocol)
0 LPR
5-828-069
1 FTP (Not Used)
2 IPP
3 SMB
CTL* [- / - / -]
CTL* [- / - / -]
[0 or 1 / 0 / 1 /step]
Switches the job spooling on and off.
CTL*
0: No spooling
1: Spooling enabled
[0 or 1 / 1 / 1/step]
Determines whether the job interrupted at
power off is resumed at the next power on.
This SP operates only when SP5828-065 is
CTL*
set to "1".
0: ON
1: OFF
[0 or 1 / 1 / 1/step]
Determines whether job spooling is enabled
CTL*
or disabled for each protocol. This is an 8-bit
setting.
4 BMLinks (Japan Only)
5 DIPRINT
6 Reserved (Not Used)
7 Reserved (Not Used)
Main SP Tables-5
75