Ricoh Da-P1 Field Service Manual page 336

3. Appendices: SP Mode Tables
2-927-002 Initial Mixing T
2-927-003 Ini-Coefficient
2-927-004 Initial Flag
2-927-005 Exchange Count
2930 [Detection]
2-930-001 Cleaner Count
2-930-002 stabilization T
2-930-003 Upper n cycle
2-930-004 Lower m cycle
2-930-005 HH:178 Upper
36
[0 to 300 / 10 / 1sec/step]
ENG*
Specifies the idle time to mix after
completing the quantitative toner supply.
[0.0 to 10.0 / 5.0 / 0.1/step]
ENG*
Specifies the supply coefficient for initial
toner supply.
[0 or 1 / 0 / 1/step]
ENG*
Determines wherther to perform the initial
supply.
[0 to 1000 / 0 / 1count/step]
ENG*
Counter of toner cartridge exchange.
[1 to 20 / 5 / 1cycle/step]
Specifies the rotating count of the cleaner
ENG*
component to calculate the number of
detection count.
[0.0 to 3.0 / 0.0 / 0.1sec/step]
ENG*
Specifies the time to stabilize the Toner End
Sensor.
[0 to 20 / 1 / 1/step]
Upper counter to exclude from the
ENG*
obtained result when toner remaining in the
developer detected.
[0 to 20 / 1 / 1/step]
Lower counter to set it aside from the
ENG*
obtained result if toner remaining in the
developer detected.
[0 to 100 / 35 / 1count/step]
ENG*
Counter for judging the upper limit when
toner remaining in the developer detected.