Ricoh Da-P1 Field Service Manual page 318

3. Appendices: SP Mode Tables
[Inrush Control]
1135
Enables or disables the setting of Inrush control (0: Disabled, 1: Enabled)
1-135-001 Inrush control
[NipWidthMeasuring]
1152
Checks the fusing nip band.
1-152-001 0:OFF 1:ON
[FusingJamDetect]
Disables or enables the consecutive jam error for the fusing unit.
1159
When set to "1" (on) this SC code is issued after the 3rd consecutive jam in the fusing
unit.
1-152-001 SCdisplay
[Motor Speed Adj]
Adjusts the speed of the motor. The motor speed can be adjusted to correct images
that appear scratchy or of uneven density. This can occur when:
1801
1-801-001 MainMotor:High
1-801-002 MainMotor:Mid
1-801-003 MainMotor:Low
1-801-011 Exit Reverse
1-801-012 Exit Reverse Mid
1-801-013 Exit Reverse Low
18
• Copying originals with large quantities of black.
• Copying originals with a large quantity of black near the trailing edge.
• Printing multiple copies of positive/negative (reverse) images.
ENG* [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG* 0: Not detects SC
1: Detects SC
ENG*
ENG* [-4.0 to 4.0 / 0 / 0.01%/step]
ENG*
ENG* [-4.0 to 4.0 / 0.0 / 0.1%/step]
ENG* [-9.0 to 9.0 / 0 / 0.1%/step]
Makes it faster (+) or slower (-) than the
ENG*
default.