Xilinx DPU IP Product Manual page 32

Chapter 5: Development Flow
Figure 23: Assign DPU Address
Generate Bitstream
Click Generate Bitstream in Vivado shown in Figure 24.
Figure 24: Generate Bitstream
Generate BOOT.BIN
You can use the Vivado SDK or PetaLinux to generate the BOOT.BIN file. For boot image creation using
the Vivado SDK, refer to the Zynq UltraScale+ MPSoC Embedded Design Tutorial (UG1209). For
PetaLinux, use the PetaLinux Tools Documentation Reference Guide (UG1144).
DPU IP Product Guide www.xilinx.com 32
Send Feedback
PG338 (v1.2) March 26, 2019