Swann AMI Solicon4 Operator's Manual page 73

Version 6.00 and higher
Table of Contents

Advertisement

AMI Solicon4
Program List and Explanations
5.5 Interface
5.5.1
5.5.20
5.5.30
5.5.40
5.5.1
5.5.21
5.5.31
5.5.41
5.5.1
5.5.23
5.5.1
A-96.250.321 / 191015
Select one of the following communication protocols. Depending on
your selection, different parameters must be defined.
Protocol: Profibus
Device address:
ID-Nr.:
Local operation:
Protocol: Modbus RTU
Device address:
Baud Rate:
Parity:
Protocol: Hyper Terminal
Baudrate:
see separate RS232 Operation Manual for Logger download.
Protocol: USB-Stick:
Only visible if an USB interface is installed. No further settings are
possible.
Range: 0–126
Range: Analyzer; Manufacturer; Multivariable
Range: Enabled, Disabled
Range: 0–126
Range: 2 400–115 200 Baud
Range: none, even, odd
Range: 2 400–115 200 Baud
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amu solicon4

Table of Contents