AMI Solicon4
Installation
3.4.
20
Install Swansensor deltaT (Option)
The following description assumes that the installation of the deltaT
sensor takes place after commissioning of the monitor.
Install the deltaT sensor in vertical position with the sample inlet [F]
and cable gland looking downwards.
To ensure laminar flow, the sample inlet must not be restricted; e.g.
any fitting which creates turbulences.
A
B
C
D
E
F
A
Panel
B
Tube connection
C
Elbow hose nozzle
D
Hose nozzle at deltaT sensor outlet
E
deltaT sensor
F
Hose nozzle at deltaT sensor inlet
A-96.250.321 / 191015