Page 2
Ensure the vents on the sides and back of the unit are not covered • Do not use near heat sources such as heaters, stoves, fireplaces • If the product has been damaged do not attempt to repair it yourself - contact Swann Technical Support for assistance...
5. Remote Control Layout 6. Monitor Connections 6.1 Connecting the Power Adapter 6.2 Connecting the AV Cable 7. Menu Operations 7.1 Picture Menu 7.2 Option Menu 7.3 Clock Menu 7.4 System Menu 8. Troubleshooting Guide 9. Technical Specifications Warranty Swann Technical Support -ii-...
Special Notice • Do not attempt to repair or disassemble, there are no user serviceable parts inside this device. • Contact Swann Technical support if this monitor malfunctions or fails to operate correctly to 60 and the to 40 Warning!
Car Power Adapter • Power Adapter • Remote Control • AAA Batteries for Remote Control • A / V Cable • Monitor Stand • Instruction Manual If any of the above accessories are damaged or missing, contact Swann Communications for assistance.
3. Monitor Layout 1. LCD Screen 2. AV1/AV2 Button 3. AUTO Button 4. PICT Button 5. MENU Button POWER Button UP Button DOWN Button VOL+ / Right Button 10. VOL- / Left Button IR Remote Sensor Monitor Stand Bracket 14. AV2 in jack 15.
4. Monitor Controls • AV1/AV2: Switches input from AV1 to AV2 • AUTO: Press to cycle between AV1 and AV2 inputs at 4, 6 or 8 seconds – push again to turn • • PICT: Choose from 5 image settings: Standard, Soft, Vivid, Light and Personal •...
Remote Control Layout POWER: Turn the monitor on/off MUTE: Press to disable sound, press MUTE again or press VOL to enable sound ▲: Move selection up ▼: Move selection down ◄/VOL-: Decrease volume / move left ►/VOL+: Increase volume / move right MENU: Press to enter / exit the Menu MODE: Change image settings from Standard, Soft, Vivid, Light and Personal...
6. Monitor Connections 6.1 Connecting the Power Adapter: Connect the Power Adapter plug to the input on the side of the monitor marked DC 12V. Plug the other end of the adapter to a power point or cigarette lighter if applicable 6.2 Connecting the AV Cable: AV conversion cable Insert the mini-jack end of the AV...
7. Menu Operation Press MENU to display following options: PICTURE OPTION SYSTEM PRESET 7.1 PICTURE – CONTRAST, BRIGHT, COLOR, SHARP, TINT to select the item and press ◄ or ► to adjust the value Press Notice The TINT option will appear on NTSC Monitors only 7.2 OPTION –...
Page 11
7.3 CLOCK TIME – Set the current time ON-TIME – Set time to turn monitor on OFF-TIME – Set time to turn monitor off ATTENTION – Set an alarm time / reminder to appear at a specified time Notice If you wish to use the Timer features TIME must be set first. Times appear in 24 hour clock format.
8. Troubleshooting Guide If your monitor appears to be malfunctioning or is not responding correctly, consult the Troubleshooting Guide below for possible solutions before contacting Technical Support for repair. Problem Check No picture, no sound adapter or car adapter. Ensure the provided power adapter is used and Monitor is not in Standby mode.
Aspect Ratio: Audio Inputs: Speakers: Audio Output: Connections: Operating Power: Monitor Dimensions: Weight: SW248-LM8 Color TFT-LCD NTSC, PAL, SECAM AV inputs x 2 800 x 600 8” Diagonal L/R AV inputs x 2 4cm loudspeakers x 2 >0.3W x 2CH 3.5mm headphone jack, 2 x AV inputs,...
Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centers. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.
Swann Technical Support Worldwide email support tech@swannsecurity.com UNITED STATES toll free 1-800-627-2799 (Su, 2pm-10pm US PT) (M-Th, 6am-10pm US PT) (F 6am-2pm US PT) USA Exchange & Repairs 562-777-2551 (M-F, 9am-5pm US PT) 020 3027 0979 (M-F 9am-5pm GMT) IRELAND...