AMI Solicon4
Installation
3.4.1
A-96.250.321 / 191015
Mount the deltaT Sensor and Connect the Sample Inlet
1 Stop operation according to chapter
tenance, p.
40.
2 Mount the deltaT sensor [E] in vertical position to the panel [A].
3 Remove the plastic tube from the elbow hose nozzle at the flow
cell.
4 Connect the plastic tube to the hose nozzle [F] of the deltaT
sensor inlet.
5 Rotate the elbow hose nozzle of the flow cell by 180 degree.
6 Install the hose connection [B], enclosed in the installation kit,
from the hose nozzle [D] at the deltaT sensor outlet to the elbow
hose nozzle [C].
Stop of Operation for Main-
21