Programming
Calibrate the thread tension
1. In the menu item Extras > Service > Multi-test tap the Thread
Abb. 67: Calibrate the thread tension
Information
The Thread tension calibration function is only intended for use
by Dürkopp Adler Service personnel. Detailed information can be found in
the Service Instructions.
5.22.4 Initializing the control, performing updates
You can use Extras > Service > Initialization and update to
reset the control and control panel to the factory defaults and to update the
control with a new software version.
To initialize the control and perform an update:
1. Tap the menu items Extras > Service > Initialization and
The screen for initialization and update appears.
Abb. 68: Initializing the control and performing an update
Operating Instructions 906 - 02.0 - 11/2016
tension option.
update.
87