DURKOPP ADLER 906 Operating Instructions Manual page 58

Selecting the line type
4. Use the line selection buttons (7) to select the type of line to be defined.
 After tapping the button for a straight or curved seam the correspond-
Defining the seam parameters for the path
Abb. 47: Creating a new seam program (2)
Selecting the seam parameters for the path
5. Tap the respective parameter.
 The window for entry opens.
6. Enter the desired value for the parameter ( p. 49).
56
• Seamless path
The clamp moves over this path to the next position without sewing.
• Straight seam
A straight seam is sewn.
• Curved seam
A curved seam is sewn.
ing window for entering the seam parameters for this path opens.
Programming
Operating Instructions 906 - 02.0 - 11/2016