DURKOPP ADLER 906 Operating Instructions Manual page 61

Programming
The fact that the transfer plate and the stacker are deactivated facilitates
and speeds up the contour test ( p. 60).
To set the desired mode in Load/Deposit mode:
1. Tap the menu items Edit > Seam program > Sewing
 The Sewing parameters window appears.
Abb. 48: Setting Mode X in Load and Deposit mode
2. Tap the PP2 Load mode/PP3 Deposit mode button.
3. Tap the Mode X button.
 The mode selection window appears.
4. Tap the desired Mode X.
5. Confirm with OK.
Operating Instructions 906 - 02.0 - 11/2016
parameters.
The Mode X button shows which mode is currently set.
59