DURKOPP ADLER 906 Operating Instructions Manual page 77

Programming
Overview of the individual machine parameters
Operating Instructions 906 - 02.0 - 11/2016
MP1 - Configuration
Symbol Meaning
Needle cooling
The following options can be set:
Without: No needle cooler activated.
Air cooling (Def.): The needle is cooled with air while sewing the seam.
Ice cooling: Optional equipment.
Foot mode
The foot can be operated in the following modes:
Jumping foot (standard mode): The foot only presses on the sewing
material while the needle is in the sewing material.
Presser foot: The foot presses continuously on the sewing material.
Sewing area size
No function.
Optional equipment
Reduced clamp pressure:
Optional equipment limiting the amount of clamp pressure to allow for
better alignment on insertion.
Stitch position optimization:
Optional equipment, activates stitch position optimization
( Additional Instructions)
Laser marking lamps:
Optional equipment providing orientation lines on insertion for easier
alignment. Up to 4 marking lamps can be switched on for each program.
This setting only activates the option, the actual switching is defined in the
program parameters ( p. 70).
Barcode reader:
Optional equipment for performing a safety check before sewing. A barcode
can be stored with each program. Agreement with the barcode on the
clamp is checked. Sewing only proceeds when the barcodes agree.
You enter the barcode ID in the program parameters ( p. 70).
Clamp type
No function.
Clamp limitation
Preset limitation (Def.)
No additional structures are taken into account.
Special limitation
Individual limits are taken into account.
Pedal
Raising and lowering the transfer plate.
Start buttons
By simultaneously pressing both start buttons, the sewing process is
started.
75