DURKOPP ADLER 906 Operating Instructions Manual page 45

Programming
Program bar (3)
The seam programs of the sequence currently open are displayed here.
The program currently being executed is highlighted in black. With the
arrow keys (5) on the right, you can move additional seam programs into
the visible bar area.
When a single seam program is opened, this fills the entire bar width.
Menu bar (4)
The menu bar contains the popup menu. The popup menu allows you to
access the various different menu items for creating and editing seam pro-
grams and for performing settings and tests on the machine. An arrow (
next to the entry shows that additional sub-menu items are available.
Arrow buttons (5) for navigating within the bar
With the arrow keys (5) on the right, you can move additional seam pro-
grams into the visible bar area.
Button for resetting the counter (6)
This button can be used for resetting the counter for the sewn programs
or sequences. The current counter value is displayed in this button.
Button for bobbin change (7)
This button is used to inform the system that a new bobbin has been
inserted (e.g. after a color change). The hook thread capacity is displayed
in this button.
Display of the current seam parameters (8)
•
•
•
•
Button for Repair mode (9)
This button is used to switch the Repair mode on and off. The current
status (On / Off) is displayed in the button.
Operating Instructions 906 - 02.0 - 11/2016
- Dimensions of the seam pattern
- Sewing speed
- Thread tension
- Number of stitches/hook thread consumed

)
43