DURKOPP ADLER 906 Operating Instructions Manual page 88

9. Tap the
 The sewing motor stops, and the thread cutter is actuated.
Setting the stroke position
To set the stroke position:
1. In the menu item Extras > Service > Multi-test tap the Set
 The following options are displayed:
2. Tap the desired symbol and execute the function.
86
button.
stroke position option.
Set stroke position
Symbol Meaning
Perform a reference run
Check the movement
Switch between jumping foot and presser foot
Switch over the mode of operation
Go to position
Set the sewing foot height
Switch off the power to the drives
Manually check the freedom of motion of the sewing foot rod
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine when setting the
stroke position.
Switch off the power to the drives when you wish to
test the freedom of motion of the sewing foot rod.
Operating Instructions 906 - 02.0 - 11/2016
Programming