DURKOPP ADLER 906 Operating Instructions Manual page 85

Programming
Abb. 65: Testing inputs and outputs
(1) - Area for input elements
The input elements are listed and selected at the left side (1) and the
output elements at the right side (2).
2. Use Select + or Select - to select the desired element in the respective
 The number of the element is displayed on the selected: button.
3. Tap the selected: button.
4. Test the element using the On/Off or Toggle buttons, depending on
Operating Instructions 906 - 02.0 - 11/2016
①
area.
the type of the input or output element.
Input elements
No. Meaning
S1 Outer frame down
S2 Bottom inner slider
S3 Transfer plate up
S4 Left transfer plate
S5 Start (start buttons)
S6 Middle transfer plate
S7 Inner slider back (reverse)
S8 Outer frame up
S9 Needle thread monitor
S10 Bobbin cover
S11 Upper housing lock
S12 Residual thread monitor (hook thread)
S13 Transfer plate up/down (pedal)
S14 Reserve
S15 Oil level control sensor
S16 Pressure monitor
S17 Quick stop
(2) - Area for output elements
②
83