DURKOPP ADLER 906 Operating Instructions Manual page 134

Characteristics
Basic type
CNC-controlled, double lockstitch sewing unit based on class 867, with a
DAC III control and specific software.
Application
Sewing pre-bound pockets, mainly back pockets up to a size of
210 x 210 mm, onto jeans.
Sewing material
Lightweight to medium-weight cotton and synthetic fiber materials.
Equipment:
• Automatic sewing foot lift
• Stroke position adjustment
• Short thread cutter
• Threading device
• Programmable needle thread tension
• Automatic material feeder
• Automatic stacker for stacking the material
• Overlapping mode of operation (while sewing or stacking, the next
Hook
Vertical hook (32 mm bobbin diameter)
Drive
• Drive via positioning drive:
• Pneumatic drive for the material feeder and the stacker.
• The arm shaft is driven by a brushless DC motor
• Maximum speed: 3000 min
132
material can be inserted and the next cycle can be started)
In addition to the sewing drive, the DACIII control controls 2 stepper
motors for the X and Y motion for creating the seam geometry and a
Z axis for sewing foot adjustment.
length and material thickness)
-1
intermittent (depending on the stitch
Operating Instructions 906 - 02.0 - 11/2016
Technical data