DURKOPP ADLER 906 Operating Instructions Manual page 39

Operation
4.12.3 Changing the transfer plate
Disassembling the transfer plate
Abb. 27: Disassembling the transfer plate
(1) - Transfer plate
To disassemble the transfer plate:
1. Hold the transfer plate (1) with your left hand.
2. Tap the 3 button on the screen.
 The locking device is released.
3. Tilt the transfer plate slightly and carefully pull it out of the bracket to
Assembling the transfer plate
Abb. 28: Assembling the transfer plate
(1) - Transfer plate
To assemble the transfer plate:
1. Slide the transfer plate (1) as far as the stopper (2) into the bracket
2. Tap the 3 button on the screen.
 The transfer plate is closed.
Operating Instructions 906 - 02.0 - 11/2016
①
the left.
①
and hold it in this position.
(2) - Stopper bracket
②
37