Preparation
Abb. 7: Sewing on pre-bound pockets (1)
(1) - Sewing material
(2) - Transfer plate
To sew on pre-bound pockets:
1. Place a bundle of sewing material onto the sewing material support
2. Place the sewing material under the transfer plate and align it with the
3. Press the pedal.
The transfer plate is closed.
4. Place the pre-bound pocket to fit into the shape cut-out of the transfer
Start sewing
1. Press both start buttons.
The sewing process starts.
Information
When the transfer plate has transferred the sewing material and has
returned to the starting position, you can prepare the next sewing process
(feed-in sewing material and insert pre-bound pocket).
Removing the bundle from the tray on the automatic stacker
The machine will stop when the tray on the automatic stacker is full.
A message on the screen indicates that you should remove the bundle.
20
①
surface of the start buttons.
marks.
plate.
(3) - Pre-bound pocket
Operating Instructions 906 - 02.0 - 11/2016
Operation
③
②