DURKOPP ADLER 906 Operating Instructions Manual page 69

Programming
Abb. 56: Adjusting a contour (2)
(3) - Stitching point to be changed
4. Use the arrow buttons to select the stitching point (3) to be changed.
5. Tap the Go To button.
 The window for changing the seam path is displayed.
Abb. 57: Adjusting a contour (3)
(4) - Green: New stitching point
6. Use the arrow buttons to move the stitching point to the new position (4).
 The modified seam path is displayed in green.
7. Tap the Next button.
 The window for selecting the technology operations opens.

Operating Instructions 906 - 02.0 - 11/2016
③
④
(5) - Red: Old stitching point
⑤
67