DURKOPP ADLER 906 Operating Instructions Manual page 70

Abb. 58: Adjusting a contour (4)
Information
Define technology operations for the new seam path (optional):
• Tap the New button: Open the Technology operations window.
• OK button: Save and exit contour adjustment (continue with step 10).
Selecting technology operations
Abb. 59: Adjusting a contour (5)
68
NOTICE
Property damage may occur!
Damage to the machine by exceeding the sewing field size.
If the sequence or seam programs do not match the configuration
set, the movement of the clamps during sewing can cause damage
to the machine or the sewing material.
Ensure that only sequences and seam programs which are suitable
for the configuration set are used.
Programming
Operating Instructions 906 - 02.0 - 11/2016