DURKOPP ADLER 906 Additional Instructions
  1. Manuals
  2. Brands
  3. DURKOPP ADLER Manuals
  4. Sewing Machine
  5. 906
  6. Additional instructions
DURKOPP ADLER 906 Additional Instructions

DURKOPP ADLER 906 Additional Instructions

Attaching the bar code scanner
Hide thumbs Also See for 906:
Table of Contents

Advertisement

Quick Links

Download this manual
906
Additional Instructions
Attaching the Bar Code Scanner

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 906 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DURKOPP ADLER 906

Summary of Contents for DURKOPP ADLER 906

  • Page 1 Additional Instructions Attaching the Bar Code Scanner...
  • Page 2 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE All rights reserved. Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents, including extracts, is prohibited without the prior written approval of Dürkopp Adler AG. Copyright © Dürkopp Adler AG - 2014...

  • Page 3: Table Of Contents

    Sticking the bar code ..............12 Activating the bar code scanner ..........13 Assigning the ID ................. 14 Aligning the bar code scanner ............ 14 3.10 Fitting the covers ................ 16 Bar codes .................. 18 Additional Instructions 906 - 00.0 - 11/2014...
  • Page 4 Additional Instructions 906 - 00.0 - 11/2014...

  • Page 5: Scope Of Delivery

    Pan-head screw M4x6 9223 000930 Cylinder-head bolt M1.6x5 9830 501025 Spacer sleeve 9840 121001 Cable tie 9850 911004 Level converter 9850 911005 Circuit board 9850 911006 Bar code scanner 9870 906006 Cable set Additional Instructions 906 - 00.0 - 11/2014...

  • Page 6: Bar Code Types

    These bar code types can be created with freeware software. Observe that the bar code must consist of 3 to 10 characters (incl. spaces). However, you can also use the bar codes provided on the last page. Additional Instructions 906 - 00.0 - 11/2014...

  • Page 7: Fitting The Parts Set

    3.1 Removing the covers 1. Loosen the screws (2). Fig. 1: Right cover, front view ② ① (1) - Right cover (2) - Screws 2. Remove the cover (1). 3. Loosen the screws (5). Additional Instructions 906 - 00.0 - 11/2014...
  • Page 8 4. Remove the cover (4). 5. Loosen the screws (6). Fig. 3: Rear cover ⑥ (6) - Screw 6. Remove the rear cover (3). You can begin with the installation and the connection of the circuit board. Additional Instructions 906 - 00.0 - 11/2014...

  • Page 9: Fitting And Connecting The Power Supply

    3. Connect the cable (8) to the 10-pin flat plug of the circuit board: White core (7) to 8 (+24 V Brown core (5) to 9 (Y9) Green core (4) to 10 (GND) Additional Instructions 906 - 00.0 - 11/2014...

  • Page 10: Laying And Connecting Supply Lines

    3. Lay supply lines with a 6-pin pin strip (4) to the point where the bar code scanner is to be fitted. 4. Fasten the supply lines (6) with cable ties (5) to the cable harness on the right. Additional Instructions 906 - 00.0 - 11/2014...
  • Page 11 5. Lay supply line A (7) in parallel to the cable harness on the left and fasten it with cable ties. Fig. 9: Laying supply line A, rear view ⑦ (7) - Supply line A Additional Instructions 906 - 00.0 - 11/2014...
  • Page 12 (11) - Supply line B (12) - Cable tie 9. Screw the level converter (13) with plug (14) tight, insert it in the X150b socket on the controller and screw it tight with the screws (15). Additional Instructions 906 - 00.0 - 11/2014...

  • Page 13: Fitting The Holder And Bar Code Scanner

    Fig. 13: Fitting the bar code scanner ① ② ③ (1) - Holder (3) - Pan-head screw (2) - Holder 3. Fit the holder (2) with an M1.6x5 (4) cylinder-head bolt onto the transport carriage. Additional Instructions 906 - 00.0 - 11/2014...

  • Page 14: Connecting The Bar Code Scanner

    (1) - Plug connection (2) - Bar code scanner 3.6 Sticking the bar code 1. Stick the created bar code strip (2) ( 2 Bar code types, p. 4) onto the right outer frame (1). Additional Instructions 906 - 00.0 - 11/2014...

  • Page 15: Activating The Bar Code Scanner

     The following appears on the control panel: Password -> Enter password. 4. Enter the code.  The following appears on the control panel: Fig. 17: Machine parameters display 5. Tap on MP1 - Configuration. 6. Tap on Options. Additional Instructions 906 - 00.0 - 11/2014...

  • Page 16: Assigning The Id

    1. Loosen the pan-head screw ( 3.4 Fitting the holder and bar code scanner, p. 11). 2. Set the holder 0911 494030 to allow the light beam (1) of the bar code scanner to be centered to the bar code. Additional Instructions 906 - 00.0 - 11/2014...
  • Page 17 Then re-install the covers you previously removed ( 3.1 Removing the covers, p. 5). Important Observe that you guide the cable from the bar code scanner through the slot (3) of the cover. Additional Instructions 906 - 00.0 - 11/2014...

  • Page 18: Fitting The Covers

    Fitting the parts set Fig. 21: Cable routing ③ (3) - Slot 3.10 Fitting the covers 1. Re-tighten the covers with the screws to establish the initial state. Fig. 22: Initial state, rear view Additional Instructions 906 - 00.0 - 11/2014...
  • Page 19 Fitting the parts set Notes: Additional Instructions 906 - 00.0 - 11/2014...

  • Page 20: Bar Codes

    Bar codes Bar codes 906_001 906_003 906_004 906_002 906_005 906_006 906_007 906_008 906_009 906_010 906_011 906_012 906_013 906_014 906_015 906_016 906_017 906_018 906_019 906_020 Additional Instructions 906 - 00.0 - 11/2014...
  • Page 22 DÜRKOPP ADLER AG Potsdamer Str. 190 33719 Bielefeld Germany Phone: +49 (0) 521 925 00 E-Mail: service@duerkopp-adler.com www.duerkopp-adler.com...

Table of Contents