DURKOPP ADLER 906 Operating Instructions Manual page 100

Abb. 75: Lubricating
(1) - Oil reservoir
(2) - Filler opening
The machine is equipped with a central oil-wick lubrication system.
The bearings are supplied from the oil reservoir.
For topping off the oil reservoir, use only lubricating oil DA 10 or oil of
equivalent quality with the following specifications:
• Viscosity at 40 °C: 10 mm²/s
• Flash point: 150 °C
You can order the lubricating oil from our sales offices using the following
part numbers:
Container
250 ml
1 l
2 l
5 l
Warning messages for oil level that is too low
• The lamp in the oil reservoir (1) lights up red.
• A warning message is displayed on the screen.
98
CAUTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect up used oil.
Dispose of used oil and oily machine parts in
accordance with national regulations.
①
(3) - Maximum level marking
(4) - Minimum level marking
Part no.
9047 000011
9047 000012
9047 000013
9047 000014
Operating Instructions 906 - 02.0 - 11/2016
Maintenance
②
③
④