Programming
Initializing the control
Caution: Initializing the control resets all values to the factory default
settings. All changes are lost.
Save your seam programs and sequences to a USB key before perform-
ing initialization.
1. Tap the Control Unit Initializer option.
The control is reset to the factory default settings.
Initializing the control panel
Caution: Initializing the control panel resets all values to the factory
default settings. All changes are lost.
1. Tap the Operation panel initialization option.
The control panel is reset to the factory default settings.
Perform control unit update
Information
The latest software version is available in the download area
at www.duerkopp-adler.com.
You can easily transfer a new software version from a USB key to the
control.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler using the order
number 9805 791113.
To perform an update of the control:
1. Switch off the machine.
2. Insert the USB key into the USB port (1) on the operating terminal.
88
Operating Instructions 906 - 02.0 - 11/2016