Important
Switch off and on again the machine to adopt the setting.
Changing the language
To change the language:
1. In the menu item Extras > Service > Adjustments tap the
The list of available languages is displayed.
2. Tap the desired language.
3. Confirm with OK.
The screen is reloaded in the selected language.
Setting date and time
To set date and time:
1. In the menu item Extras > Service > Adjustments tap the Date
The data entry window for date and time is displayed.
2. Enter the date and/or time.
3. Confirm with OK.
The entered values are adopted.
Setting the brightness
To set the brightness of the control panel:
1. In the menu item Extras > Service > Adjustments tap the Touch-
2. In the following window tap the Contrast Brightness option.
A window with slider controls is displayed.
3. Pull the corresponding slider control up or down to change the value.
The changes are immediately displayed.
Testing the touchscreen
You can use the Extras > Service > Adjustments menu item to
check that the touchscreen is functioning correctly over all areas of the
screen.
To test the touchscreen:
1. In the menu item Extras > Service > Adjustments tap the Touch-
2. In the following window tap the Touch Test option.
An empty window is opened.
80
Language option.
and time option.
Adjustments option.
Adjustments option.
Programming
Operating Instructions 906 - 02.0 - 11/2016