Mazda CX-9 Grand Touring 2007 Manual page 44

Fig. 20: Identifying Upper Timing Chain Guide Bolt
Courtesy of MAZDA MOTORS CORP.
WATER PUMP REMOVAL NOTE
NOTE:
When the water pump is removed, the engine coolant may flow through
the cylinder block and penetrate the oil pan. To prevent the engine coolant
from accumulating in the oil pan, remove the oil pan drain plug before
removing the water pump.
1. Remove the oil pan drain plug.
2. To prevent engine coolant from penetrating the oil pan, line the cylinder block with plastic sheeting as
shown in the figure before removing the water pump.
Fig. 21: View Of Water Pump And Plastic Sheeting
Courtesy of MAZDA MOTORS CORP.
WATER PUMP INSTALLATION NOTE
1. Tighten the water pump bolts in the order shown in the figure.
Tightening torque
8.5-11.5 N.m {87-117 kgf.cm, 76-101 in.lbf}
2007 Mazda CX-9 Grand Touring
2007 ENGINE Cooling System (MZI-3.5) - CX-9