Mazda CX-9 Grand Touring 2007 Manual page 352

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select the "Toolbox" tab.
2. Select "DataLogger".
3. Select "Modules".
4. Select "PCM".
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "DataLogger".
3. Select the PID from the PID table.
4. Verify the test results according to detections on the screen.
Fig. 6: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
PID/DATA MONITOR CHART
PID Name
AAT Indicate the ambient air temperature
AC_REQ A/C request signal
ACCS A/C relay
ALTF Generator field coil control duty value
APP Accelerator pedal position
APP1 APP sensor No.1
APP2 APP sensor No.2
APP3 APP sensor No.3
ARPMDES Target engine speed
2007 Mazda CX-9 Grand Touring
Description Unit
°C
Off/On
Off/On
%
%
%
V
%
V
%
V
RPM