Mazda CX-9 Grand Touring 2007 Manual page 149

VCTADVERR2
PCM CONNECTOR TERMINALS REFERENCE
Other
KOEO Hot Idle 48 KM/H (30MPH)
ETCVREF 5
VREF 5
VPWR VBAT
KAPWR VBAT
PCM CONFIGURATION [MZI-3.5]
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select the "Toolbox" tab.
2. Select the "Module Programming".
When using the PDS (Pocket PC)
1. Select "Programming".
2. Select "Module Programming".
3. Then, select the "Programmable Module Installation", "PCM" from the screen menu.
4. Select "PCM" and perform procedures according to directions on the M-MDS screen.
5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
If a DTC is present, perform the applicable DTC inspection.
Fig. 5: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
POWER STEERING PRESSURE (PSP) SWITCH INSPECTION [MZI-3.5]
CONTINUITY INSPECTION
2007 Mazda CX-9 Grand Touring
2007 ENGINE PERFORMANCE Control System (MZI-3.5) - CX-9
0 0.06
Measured/PID Values
5 5
5 5
VBAT VBAT
VBAT VBAT
-0.43 0
89 KM/H (55MPH)
5
5
VBAT
VBAT
DEG
Units Measured/PID
DCV
DCV
DCV
DCV