Mazda CX-9 Grand Touring 2007 Manual page 693

2007 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.5) - CX-9
Has FREEZE FRAME DATA been
recorded?
2 VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Is any related Service Bulletins
available?
3 INSPECT ALL OTHER PATS DTCs
Repair all other PATS DTCs before
P1260.
(see IMMOBILIZER SYSTEM
COMPONENT
REPLACEMENT/KEY
ADDITION AND CLEARING
[ADVANCED KEYLESS
SYSTEM] .)
(see IMMOBILIZER SYSTEM
COMPONENT
REPLACEMENT/KEY
ADDITION AND CLEARING
[KEYLESS ENTRY SYSTEM] .)
Have all other PATS DTCs been
diagnosed?
4 INSPECT FOR OTHER
POWERTRAIN DTCs
Repair all other powertrain DTCs
before P1260.
Have all other powertrain DTCs
been diagnosed?
5 ATTEMPT TO START ENGINE
Complete the keep alive memory.
Reset to clear DTC 1260.
This reset initializes the PCM to
communicate with the PATS.
Attempt to start the engine.
2007 Mazda CX-9 Grand Touring
Yes
No
Yes
No
Yes
No
Yes
repair order, then go to the next step.
Perform repair or diagnosis according to
the available Service Bulletins.
If the vehicle is not repaired, go to
the next step.
Go to the next step.
Go to the next step.
(see IMMOBILIZER SYSTEM
COMPONENT REPLACEMENT/KEY
ADDITION AND CLEARING
[ADVANCED KEYLESS SYSTEM] .)
(see IMMOBILIZER SYSTEM
COMPONENT REPLACEMENT/KEY
ADDITION AND CLEARING
[KEYLESS ENTRY SYSTEM] .)
Go to the next step.
Go to the appropriate DTC
troubleshooting.
No system malfunctions exists at this
time.
For intermittent No Starts or Start Stalls,
verify intermittent PATS faults.
Then go to the next step.
NOTE:
PATS cannot stall the engine after